Spindle shafts and sleeves
Spindle shafts
Spindle shafts
Spindle shafts
Spindle shafts 1
Spindle shafts with right and left rotating head, composed of spindle shaft and two hot assembled sleeves.
Material: forged steel.
Dimensions: L 11530 mm x Ø 630 mm.
For a milling line in Luxembourg.
Spindle shafts
Spindle shafts
Spindle shafts
Spindle shafts 2
Spindle shafts with fixed head.
Turning machining performed and single block milling.
Material: forged steel.
Dimensions: L 7200 mm x Ø body 545 mm x Ø right head 1010 mm x Ø left head 504 mm.
For a milling line in Luxembourg.
Spindle shafts
Spindle shafts
Spindle shafts
Spindle shafts 3
Spindle shafts with fixed head.
Head milling for disassembling turning machining performed in a new head with hot assembling on the shaft.
Dimensional report.
Material: 33CRNIMO14.5
Dimension: L 8000 x Ø 1200 mm, weight 16 ton.
For a milling line in Luxembourg.
Destinato a cliente Lussemburgo.
Universal shaft
Universal shaft
Universal shaft
Universal shaft with longitudinal rounded grooves for coupling.
Turning machining performed and single block milling.
Material: forged steel with heat cement treatment only for toothing.
Dimensions: L 3200 mm x Ø body 450 mm.
For a milling line in Italy.
Sleeve tip
Sleeve tip
Sleeve tip
Sleeve tip
Sleeve tip to be assembled on spindle shaft with hot mounting.
Material: forged steel.
Dimensions: H 1180 mm x Ø 950/1200/1320 mm.
For a rolling mill line in Belgium.
Hirth sleeve
Hirth sleeve
Hirth sleeve
HIRTH sleeve 1
Articulated sleeve with HIRTH toothing and internal core to be assembled on the spindle shaft.
Material: forged steel.
Dimensions: L 740 mm x Ø 345 mm.
For a rolling mill line in Belgium.
Hirth sleeve
Hirth sleeve
Hirth sleeve
HIRTH sleeve 2
Articulated sleeve with HIRTH toothing and internal core to be assembled on the spindle shaft.
Material: forged steel.
Dimensions: L 680 mm x Ø 700 mm.
For a rolling mill line in Belgium.
Sleeve with inner toothing
Sleeve with inner toothing
Sleeve with inner toothing 1
Sleeve with inner toothing 2
Coupling sleeve for spindle shaft.
Turning, milling, boring machining performed and internal toothing.
Material: forged steel.
Dimensions: L 795 mm x Ø 670 mm.
For a rolling mill line in Luxembourg.
Coupling sleeve for extension.
Turning, milling, boring and internal toothing, grinding and assembly performed.
Material: forged steel.
Dimensions: L 990 mm x Ø 1100 mm.
For a rolling mill line in Belgium.
Coupling with outer toothing
Coupling with outer toothing
Coupling with outer toothing 1
Coupling with outer toothing 2
Rounded toothing coupling.
Turning, boring milling, toothing and grinding performed.
Material: forged steel.
Dimensions: H 580 mm x Ø 720 mm x Ø toothing 1200 mm.
For a rolling mill line in Belgium.
Coupling with rounded toothing complete with internal key.
Turning, boring milling, toothing and grinding performed.
Material: forged steel.
Dimensions: H 580 mm x Ø 860 mm x Ø toothing 1160 mm.
For a rolling mill line in Belgium.